Zappi

£1,350.00

Eco-smart EV charge point (Standard Installation)

This future proof, intelligent electric car charging is conceived, evolved, and manufactured in-house right here in the UK.  Is available as a socketed (no lead) or tethered (6.5mt lead) option and delivers 7kW of charge.

Clear
SKU: zappi Category:

Cost excludes £350 Grant that we claim on your behalf. Valid until 31st March 2021

Zappi has 3 charging modes which makes it great for all homeowners. Those with grid-tied micro-generation systems like wind or solar can use the eco settings allowing users to save on energy bills. The charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station.

Available as a 7kW (single phase) or 22kW (3-phase) charger

  • 3 Charging Modes: ECO, ECO + & FAST
  • Optimises Microgeneration Self-Consumption
  • Works With Solar PV Or Wind Turbine Systems
  • Economy Tariff Sense Input
  • Programmable Timer Function
  • Charge & Event Logging
  • Pin-code Lock Function
  • OLEV (Home/Work Scheme) Approved – HUB required
  • Tap Operated Display Backlight
  • Built-in RCD Protection
  • Integral Cable Holster
  • Remote Control & Monitoring Add-on Option
  • Supplied With Clip-on Grid Current Sensor(s)
  • Works Alongside Battery Storage Systems
  • A Future Proof Installation
  • 3 Year Warranty

Charging modes

ECO

Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home. Charging will continue until the vehicle is fully charged, even if power is drawn from the grid.

ECO +

Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home. Charging will pause if there is too much imported power, continuing only when there is surplus free power available.

FAST

In this mode, the vehicle will be charged at maximum power. This is just like an ordinary Mode 3

Performance

Mounting Location                              Indoor or Outdoor (permanent mounting)

Charging                                              Mode 3 (IEC 61851-1 compliant communication protocol

Display                                                 Graphical backlit LCD

Front                                                     LED Multicolour, according to charge status and current

Charging Current                                6A to 32A (variable)

Dynamic Load Balancing                   Optional setting to limit current drawn from the unit supply or the grid

Connector Type                                    Type 2 tethered cable (6.5m) or type 2 socket with locking system

Charging Profile                                   3 charging modes: ECO, ECO+ & FAST

Compliance                                          LVD 2014/35/EU, EMC 2014/30/EU, EN 62196, EN 62955:2018 CE certified

Electrical Specs

Rated Power                                       7kW (1-ph) or 22kW (3-ph)

Rated Supply Voltage                       230V AC Single Phase or 400V AC 3-phase (+/- 10%)

Supply Frequency                              50 Hz

Rated Current                                    32A max

Standby Power Consumption          3W

Integral Earth Leakage Protection 30mA Type A RCD + 6mA DC protection (EN 62955)

Economy Tariff Sense                    Input 230V AC sensing (4.0kV isolated)

Wireless Interface                           868 MHz (proprietary protocol) for wireless sensor & remote monitoring options

Grid Current Sensor                        100A max. primary current, 16mm max. cable diameter

Cable Entry                                      Rear, bottom or side

Mechanical Specs

Enclosure Dimensions                    439 x 282 x 122mm

Protection Degree                           IP65 (weatherproof)

Enclosure Material                          ASA

Operating Temperature                 -25°C to +40°C

Installation Requirements

Circuit Breaker                                  32A Curve B

Earthing arrangement                    TN : can be connected to the PME supply. Complies with BS7671:2018-amd1:2020 722.411.4.1 (v) TT : earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles.

Color

White, Black

Reviews

There are no reviews yet.

Be the first to review “Zappi”

Your email address will not be published.

Scroll to Top
Call Now ButtonCall Now